关于美军综合后勤保障的综述

综合后勤保障是美军武器系统研制与采办过程的一项重要活动,本文阐述了这一活动的基本概念、实质内容、发展动态以及对我军的启示。     

把握"四性"特征培育战斗精神

战斗精神具有政治性、实践性、团队性、系统性特征.培育战斗精神,要把握其特征,以坚定信念、铸牢军魂为首要任务,以任务摔打、日常养成为基本途径,以发扬传统、体现特色为重要内容,以健全机制、形成合力为有效保证.     

低地球轨道卫星网络节能方法

通常卫星的唯一能源来源是太阳能,因此星上网络设备的能源供应问题比地面网络的更加严峻。通过修改和扩展链路容量受限的最小代价多商品流模型来适应卫星网络这一特殊的体系结构,并基于低轨道卫星网络的多重覆盖机制和流量分布模型,改进现有的启发式算法来关闭冗余的卫星节点、星地链路和星间链路。在满足链路利用率和路由跳数增加比例约束的条件下,仿真实验中关闭上述三种参数的比例分别可达59%、61%和72%,卫星网络的总体节能比例可达65%。     

柱体大攻角入水弹道建模与仿真

基于CFD计算获得了柱体大攻角入水过程流体动力特性,进而建立了大攻角入水弹道模型,使用流场-弹道耦合计算结果验证了模型的适用性和精度,然后仿真分析了入水攻角和速度对入水弹道的影响规律。该模型能较准确地预测柱体大攻角入水弹道,对研究发射平台安全性问题和空投鱼雷等入水攻击性武器的入水弹道预测问题等有较强的指导意义。     

一类带时滞的飞行器系统干扰观测器控制

复杂的飞行器系统容易同时受到外部干扰和时滞的影响,为改善该系统控制性能设计一种新的基于干扰观测器控制策略.通过构造辅助观测器以及适当的坐标变换观测将来时刻的干扰,得到相应的干扰预测规律.与传统的鲁棒控制律结合,能够保证系统的稳定性,同时干扰的影响可以得到实时补偿.仿真结果表明该方案在外部干扰和时滞共同作用下具有较好跟踪特性.     

舰空导弹武器抗干扰与反隐身技术研究

电子战在现代战争中的地位和作用日益提高,已从战争辅助保障手段发展成为战争中不可缺少的重要作战武器;电子战是现代战争的序幕与先导,并贯穿于战争的全过程,进而决定战争进程和结局.在分析舰空导弹武器面临的典型干扰目标威胁环境基础上,分析了目前舰空导弹武器存在的主要问题,提出了舰空导弹武器系统发展方向的建议.     

水面舰艇规避尾流自导鱼雷方法研究

规避机动是水面舰艇对抗尾流自导鱼雷的通用方法,对典型的停车规避、反向尾流、交叉尾流规避方法进行了定性分析,并提出平行尾流方法;通过模拟仿真分析,提出了反向尾流、平行尾流方法的适用条件和使用建议,可为水面舰艇规避尾流自导鱼雷提供参考.     

Gas metal arc welding of high nitrogen stainless steel with Ar-N2-O2 ternary shielding gas

High nitrogen stainless steel with nitrogen content of 0.75％was welded by gas metal arc welding with Ar—N2-O2 ternary shielding gas. The effect of the ternary shielding gas on the retention and improvement of nitrogen content in the weld was identified. Surfacing test was conducted first to compare the ability of O2 and CO2 in prompting nitrogen dissolution. The nitrogen content of the surfacing metal with O2 is slightly higher than CO2. And then Ar—N2-O2 shielding gas was applied to weld high nitrogen stainless steel. After using N2-containing shielding gas, the nitrogen content of the weld was improved by 0.1 wt％. As N2 continued to increase, the increment of nitrogen content was not obvious, but the ferrite decreased from the top to the bottom. When the proportion of N2 reached 20％, a full austenitic weld was obtained and the tensile strength was improved by 8.7％. Combined with the results of surfacing test and welding test, it is concluded that the main effect of N2 is to inhibit the escape of nitrogen and suppress the ni-trogen diffusion from bottom to the top in the molten pool.     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Numerical and experimental study on the response characteristics of warhead in the fast cook-off process

The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement. The goal of this study is to obtain data on the warhead in the fast cook-off process. In this paper, a numerical calculation method is proposed, whose reliability is supported by comparison with experimental results. Through the numerical calculation, the temperature distribution, temperature change, and ignition time are acquired. The numerical results show that the ignition time is 76 s after the warhead started to burn and that the maximum temperature of the explosive's outer surface is 238.3 C at the ignition time. The fast cook-off experiment of the warhead is implemented so as to get the flame temperature and reaction grades that are not available through numerical calculation. The experimental results show that the overpressure fails to reach the preset minimum value which is equivalent to 6 kg of TNT and that the reaction grade is deflagration. The research results have reference value for the design of the warhead and the reduction of detonation risks.